Fits on 2013 and older carbureted models. This heavy duty rubber cover provides very helpful height increase while offering great anti slip qualities. It brings the brake pedal reach up half an inch (1.3cm), allowing better brake application performance. Easy installation, just slip this one on!
Posted by Mike Oko on 20th Oct 2020
This Ural mod allows your foot to engage the brake pedal faster and without :stretching" for it. I have size 14 kayak feet and it made a difference.
Posted by Bobby on 6th May 2018
Greatly improves the relationship of the foot to the brake pedal and the safe application of braking. Rear braking is much more natural, smooth, and better angle for applying foot pressure. I simply slipped on with my hands. No soap, warm water, or WD-40 required. It was a nice warm day. Must have. Inexpensive.
Posted by Mark Muello on 2nd Mar 2018
So glad I bought the brake pad raiser ..so easy to put on 5min job. Use the soap and h2o!!
Posted by Kevin (mod_rocker) on 4th Feb 2018
As other reviewers mentioned, I warmed up the pad in a cup of warm water to ease installation. Not only is the pivot angle less severe but the surface is less prone to sole slipping!
Posted by Mike on 23rd Aug 2017
Great product.Let it sit in a glass of warm soapy water for a minute and it slides right on. Makes finding brakes easier.
Posted by Unknown on 22nd Jul 2017
The break pedal riser is difficult to install but well worth it. I can now get full use of my rear brakes without having to contort my toe at funny angles.
Posted by Michael Byrd on 11th Jul 2017
The little extra height on the rear brake pedal makes a world of difference. I like mine so well I bought two more for a friend.
Posted by Karl on 13th May 2017
Must have for any and all Urals. Fits perfectly.
Posted by hank somerville on 15th Dec 2016
it is great not to have to stand up to apply rear brakes
Posted by cheeseheadmike on 31st Oct 2016
It's something that should be added at the factory. Took less than a minute to install with a spritz of WD40. Soapy water might be a better choice, though. The extra height provided by the pad results in less pedal travel to engage the rear brakes and more pressure on the shoes for better stopping. Real brakes instead of retarders.
Posted by Unknown on 13th Oct 2016
This was very easy to install and what is more important it made the brake much more accessible and in my mind safer.
Posted by John on 12th Sep 2016
Pedal was easy to put on once I started with outside edge first and just stretched inside edge over metal existing pedal.
It raised the brake pedal enough to be comfortable.
Posted by Unknown on 19th Jun 2016
I bought this to raise the height of the brake pedal because I lowered my pegs. It took all of 1 minute to install.
Posted by mwb on 25th May 2016
Hoowee, whoda thought brakes on a Ural were THAT easy.
Posted by Brian on 10th Nov 2014
Well manufactured. Installs in seconds.Makes it easier to apply rear braking.Should be standard on all New Urals!
Posted by vincent on 29th Aug 2014
This rubber brake peddle cover installs easily in under a minute and adds about 3/4" height to the peddle, making it easier to apply the rear brakes. No more Russian Ballet every time you want to stop. I highly recommend this product.
Posted by Tim on 12th Jun 2014
It makes a big improvement in rear braking force.
Much better, easy and very cool.
However, It raises the paddle foot and now I have to consciously keep my foot back to prevent my boot from leaning on the peddle and causing the rear brake light to come on as I ride.
I will be looking to raise the foot pegs to avoid this.
Posted by Tim on 12th Jun 2014
It is a huge improvements in rear braking. Now, it is actually a brake vs. a "retarder".
The only issue I have is that now my brake side foot/toe rides on the brake lever causing inadvertent brake light to come on if I do not keep my toe back and consciously away from the brake peddle.
I will be looking into raising my foot pegs to avoid this happening.
Posted by Alan Monaghan on 7th May 2014
I love the quality of the new pedal pad. My only problem is because I am loosing about a 1/4 to 1/2 inch between the pedal and the carb, some of my riding boots don't fit in so well. I am still looking at if I can move the pedal down a notch, but the product is exactly what I wanted.
Posted by Antoinette Azolakov on 21st Feb 2014
This rubber cover goes on easily, looks great, and raises the brake pedal to a perfect height for easy, quick braking. A very satisfying one-minute mod.